Monday, November 19, 2012

Five must-dos to prepare your Apache for winter


As harvest finishes in the majority of the country, the time of year has come to put most farm machinery away, including your Apache, until spring. One of the keys to keeping your sprayer in working order for next spring is proper winterization before the freezing temperatures settle in for the season.

1. Clean your Apache
Cleaning the sprayer includes both the inside and outside of the machine. While it is important to thoroughly rinse the wet system, it is equally important to give attention to the exterior of the sprayer. Proper cleaning will help prevent premature rust and corrosion. Using a pressure washer, clean the outside of the sprayer including the booms, frame and undercarriage. Additionally, remove all filters, screen tips and check valves to wash them, and then reinstall all parts to keep moisture out during the winter.

To clean the inside of the sprayer, completely rinse the entire system to ensure any chemicals aren’t left from the last application. Here is a video with a few reminders on properly flushing the wet system. 



2. Inspect the sprayer
After washing the sprayer, check it over for any cracks, chips or scratches in the paint and touch up these areas to avoid corrosion. While inspecting your Apache, take this opportunity to grease all service points on the sprayer. If any leaks are found inside the spray tank, repair them before storing the sprayer.

3. Winterize the wet system
After cleaning the sprayer’s exterior and rinsing the inside of the system, it is important to circulate antifreeze through the entire wet system to keep it from freezing during the cold months. Recreational Vehicle antifreeze is recommended since it is less toxic to animals and may be sprayed on the ground.

To start, put approximately 30 gallons of RV antifreeze in the product tank, although more may be required depending on the boom length. Following which, put an additional 5 gallons of RV antifreeze in the rinse tank. With your Apache running, turn on the product pump to circulate agitation of the antifreeze. While the pump is running, turn on each boom section until RV antifreeze comes out of the nozzles. If you are operating a 2011 or 2012 Apache model, turn on the flow back rinse switch to winterize the flow back line.

To winterize the rinse tank, turn the fill station control valve to rinse-to-pump and the agitation valve to rotoflush. After circulating for a few seconds, turn the product pump off, the agitation valve back to agitation and the fill station control valve back to product-to-pump.

If the sprayer is equipped with an eductor, put the eductor in the operation position and turn on the product pump. Open the eductor safety valve, the main eductor valve and the red tank valve. Following which, open the lid rinse valve and let the antifreeze circulate in the eductor for a few seconds and finish by closing the valves and turning off the product pump.

To run the antifreeze through the entire wet system, don’t exclude any components such as the lines that connect to the agitation and pump pressure gauges. Make sure they have antifreeze in them as well to avoid frozen gauges. Finally, open the strainer drain valve to ensure RV antifreeze is present in the strainer.

Check out this video for a more detailed step-by-step guide on winterizing your Apache’s wet system. 


4. Winterize the foam marker system 
If your Apache sprayer has a foam marker system, don’t forget to include it in the winterization process. Start by draining the foam tank and disconnecting the hoses from the foam chamber. Next, replace the strainer bowl. Then, add two quarts of windshield washer fluid, and finish by running the foam markers until windshield washer fluid comes out of the hose at the foam chamber. RV antifreeze can be used in place of the windshield washer fluid, but depending on the size of containers, the windshield washer fluid may be easier to handle.

5. Store the sprayer
The best place to house a sprayer during the winter is in a dry, storage building. Cover all openings on the sprayer to keep insects and dirt out of the system. If the sprayer is stored outside, take the time to remove all hoses. To complete the winterization process, remove the fully charged battery and any consoles from the cab and store them in a warm area. Finish by filling your Apache’s fuel tank to reduce condensation and moisture build up.

By taking good preventative practices with your Apache sprayer this fall, you will save time and repair costs in the spring. 

Tuesday, November 13, 2012

Apache owner building remote control AS710 model

Nathan Rowings (far right) shows off what will soon be his hydraulically-powered remote control Apache AS710 to employees at Equipment Technologies.

Nathan Rowings, an Apache AS710 sprayer owner from Greencastle, Indiana, has taken his appreciation of Apache sprayers to a whole new level.

For the past three years, Rowings has been in the process of building a scaled replica of his AS710. Not just one he can put on display, but one he can operate. His plan is to have the model sprayer hydraulically-powered by remote control and install a functioning wet system. That's right; it will actually spray water out the booms.

"I've just always been into models and RC cars growing up," said Rowings. "This is the first one I've built myself. I think it's going to turn out great."

The model is nearly identically scaled to the sprayer's engineered design. The most important tool Rowings says he is using is a jewelers blowtorch to help him weld the different pieces together. In the end, the model sprayer will get a fresh coat of Apache red paint and decals will be stuck on. Rowings says he will keep us posted on his progress and will bring his RC sprayer back to the factory when it's complete.

"I've been working on it off and on for some time, but hope to have it finished by August 2013," said Rowings.

Keep up the great work Nathan!

Monday, November 5, 2012

Enhance Your Bottom Line with Section 179

2013 AS1220 Plus II tackling 40% grades in eastern Washington.


If you've been on the fence trying to decided whether to buy new or used equipment for your operation, this is definitely the year to buy.

Section 179 is a generous tax deduction of $139,000 available for most new and used capital equipment. However, the big savings won't last. Once the calendar turns to 2013, the annual deduction limit will drastically reduce to its pre-2003 level of only $25,000. Needless to say, the savings are now!

To give you an idea of the difference in savings for when you buy, here's a breakdown comparing 2012's Section 179 deduction to the deduction change beginning January 1, 2013:



Visit ApaceEarlyBuy.com to start saving today.

Sunday, July 22, 2012

When at odds with Mother Nature, bet your chips on a sure thing


This is not the growing year any of us wanted to see. Fields are dry, brown and some growers are already considering insurance relief and calling it a year. This is not a time to panic, but rather a time to focus cashing in on the facts.

If you look at precipitation totals for the year, they are below average. The Corn Belt saw stretches of over 100 degree temperatures with barely 0.10” of rain. But as you can see in the map below, you can’t say it isn’t raining. It’s just not raining where many need it most.

Courtesy: NOAA

This map provided by the National Oceanic and Atmospheric Administration shows the amount of precipitation 14 days prior to July 18. Much of the Upper Midwest saw at least 1.5” and the South experienced as much as 6” in some places.

A lot can happen in a few weeks’ span. It was at the end of May when Illinois farmers were reporting “80% of their corn was in good to excellent condition,” in a Peoria Journal Star article [link]. There is still plenty of time for rain to make a difference. In the hardest hit areas, this is especially true for the soybean crop. When that time comes, growers will then have to turn their attention and watch for three perils before harvest: fungus, bugs and weeds. Perils all too familiar to applicators.

The combination of extreme heat and minimal rain has increased certain insect populations, making conditions ideal for eggs to hatch. Spider mites, podworms and others are out in droves during this unusual season. Then when a little rain does come, fungus begins to develop. Finally, weeds in the field absorb any moisture that falls away from the stressed crop. The best line of defense in saving yields and protecting your investment from the terrible trifecta of fungus, insects and weeds is a self-propelled sprayer.

Looking at the NOAA map above, a typical Corn Belt farmer, for example, would be relying on corn and/or soybean harvests along with crop insurance as generated income this year. Projected corn yields in June dropped 12% from May, which seems like a significant downturn. In general, a 12% drop is pretty common as seen in the chart below. This yield decline is packing a larger than usual punch to growers because we haven’t experienced a significant drop in yield in more than 10 years. The positive side to this story is that the past years have put the grower in a favorable financial position.

Courtesy: USDA

Soybean prices through the middle part of July, however, are dancing around $16.00/bushel with experts predicting the price to hold until after harvest. That is if any rain falls. One soybean agronomist was recently quoted as saying that from water deficit stress during the reproductive growth stage, the soybean plant is vulnerable to “reduced pod numbers, reduced seed per pod and small seed." [link]

Adding crop insurance into the mix, it’s clear a farmer’s net income this year will have to be spent wisely. Risks exist every year. When playing the odds with Mother Nature accompanied with declining income, it’s assuring to not only have a low risk financial investment sitting on the farm, but also a machine that increases yield potential for seasons to come.

Already identifying the importance of owning a self-propelled sprayer, the clear choice among all competitors is the Apache sprayer. Whether it’s an off year or not, cost of ownership and return on investment are two critical points of concern when purchasing any farm equipment. The Apache leads the way on both fronts.

When you compare the Apache to competitors, there are numerous factors giving the Apache the lowest cost of ownership in the industry:

     - Service costs are lower
     - Replacement parts cost thousands of dollars less
     - More efficient fuel economy
     - Factory-installed state of the art precision options
     - An industry best 5-year warranty saves money on parts and labor
     - Purchase price is $25,000 to $75,000 less than comparable hydrostat sprayers

In addition, the Apache offers the highest resale value in the industry. Based on a statistical analysis by a Indiana University school of business professor, a five year old Apache has an average resale value of 72% of its original purchase price.

That’s making a sound financial decision based on consistency in an inconsistent world. 



Wednesday, June 27, 2012

Weed control tips for dry conditions


Extreme and severe drought conditions continue to spread across much of the United States, increasing the potential for ineffective weed resistance for growers.

We all know weeds grow more rapidly in soils where it has recently rained, especially for the usual suspects of weeds we see every summer. When this occurs, get back into your fields and scout how much growth has taken place a few days after it rains. This will determine if your application rate should be altered.

Dry soils can cause headaches for growers when it comes to postemergence weed control. The part of the plant above ground toughens and thickens in these adverse conditions. This change greatly reduces the amount of herbicide the plant can absorb, offering little weed control.

While no absolute solution exists, there are things you can do to increase the likelihood you applied postemergence herbicide is absorbed. The simplest advice we can offer is to slow down when spraying. With dry soil conditions, you generate more dust driving through your field. This dust kicked up lands on the crops and keeps what you're spraying from getting to the plant. Running your sprayer at a lower speed will reduce the amount of dust and help the postemergence herbicides attach to your crops.

In addition, using a full rate when applying postemergence herbicides in dry conditions will help. Always read the labels of your postemergence herbicides, but typically applying the full recommended rate will support weed control for adverse conditions.

Conditions now aren't nearly as bad as previous droughts of record proportion, however long-term forecasts call for continued high temperatures and little to no precipitation. At least 19 states have already seen temperatures reach 100 degrees, and we're not even into July yet.

Thursday, June 21, 2012

Equipment Technologies opens the ET Ag Center

The ribbon is cut officially opening the ET Ag Center.

Equipment Technologies, home of the award-winning Apache sprayer and the largest independently owned manufacturer of agriculture self-propelled sprayers in North America, expands its operation by opening the ET Ag Center adding 56 new jobs by 2015.

“Equipment Technologies has seen a growing trend of growers searching for knowledge and thought leadership when it comes to precision farming and application in general. The ET Ag Center is built to share our application knowledge and train the next generation of precision growers,” said Equipment Technologies CEO Matt Hays.

In the fall of 2011, Equipment Technologies split into two divisions: one to focus on its award-winning Apache line of self-propelled sprayers, and the other to focus on parts distribution, service and training. The ET Ag Center is the logistics, service and knowledge backbone of SpraySmarter.com, ET’s e-commerce, online sprayer parts sales website. SpraySmarter.com also has a parts sales counter inside the ET Ag Center for local customers to pick up and purchase sprayer parts.

The ET Ag Center is also responsible for wholesaling both Apache sprayer parts and other best-in-class precision and application sprayer products to retailers throughout the United States, Canada, Ukraine, and Australia.

The ET Ag Center will lead the way in training and instruction, with a focus on sharing precision agriculture education to the grower. Included in the ET Ag Center are multiple precision agriculture classrooms for spraying clinics, commercial applicator license renewal classes and simulated precision training utilizing field computers from the top two manufacturers in precision agriculture, Raven and Trimble. Having all of these offerings under one roof will uniquely benefit growers from around the world as they seek to expand their application-focused education and hands-on training. 

“From a training standpoint, we have grown leaps and bounds with the creation of the ET Ag Center. We are increasing the number of training and service events with the added classrooms and resources to better educate the grower,” said ET’s director of parts and service Kevin Covey. “From a parts standpoint, we can better serve the local applicator with the addition of an in-house SpraySmarter.com sales counter. Online orders can also be ship within 24 hours with a brand new logistical infrastructure, thanks in part to the additional space.”

Throughout the planning of the ET Ag Center, the emphasis was on research and development of the Apache, ET’s award-winning self-propelled sprayer. Included in the construction are a test track and proving grounds located behind the ET Ag Center with the sole focus of product development for the Apache sprayer. The track encompasses a 45-foot high hill with varying grades ranging from 10% to 40% and multiple terraces, representing different topographical land conditions Apache customers maneuver over.

“This testing track and proving grounds are significant for our continued success,” said ET’s director of engineering Chad Ringer. “ET truly prides itself on listening to our customers. We can now experiment and implement the ideas of our customers, fine tune a quality product, and let our customers enjoy the additional benefits.”

Aligning with ET’s dedication to continuous improvement and constant innovation for the Apache is sales and service training support. These training efforts will cater to our over 200 Apache customers residing in Indiana and nearly 3,000 more around the world.

Equipment Technologies, employing 97 Indiana residents with 52 living in Morgan County, was able to proceed with this necessary expansion from state, county and city government support. The Indiana Economic Development Corporation provided $550,000 in performance-based tax credits and $25,000 in training grants based on Equipment Technologies’ job creation strategy. The Mooresville Town Council provided infrastructure assistance abatement to property tax per the request of the Morgan County Economic Development Corporation.

"It's great to know local government saw the need for our growth and responded the way they did. Equipment Technologies is grateful to have the support from the Indiana Economic Development Corporation, Morgan County Economic Development Corporation and the Mooresville Town Council for this expansion of our research and training facilities,” said ET’s materials manager Jeff Goodman. “Throughout construction of the ET Ag Center, Equipment Technologies solely focused on using as many local vendors, contractors and subcontractors as possible.”

Equipment Technologies is the largest independently-owned manufacturer of self-propelled sprayers in North America. Operating from its 168,000 square foot complex in Mooresville, Ind., the company distributes its sprayers and sprayer parts throughout North America, Ukraine and Australia through a network of independent dealers.

The ET Ag Center is located at 455 Merriman Road, approximately 0.5 miles south of ET’s manufacturing facility in Mooresville, Indiana.

Monday, June 4, 2012

Practice Sprayer Safety

We've noticed in the news recently a growing number of incidents involving sprayers. Some of which have taken place in a field, others have taken place on the roadways.

It's important to be cautious when operating large farm machinery, including your sprayer. Below we've listed some general tips to ensure you practice sprayer safety:

  • Know your sprayer and operate it properly
  • Review your safety precautions in your owner's manual
  • Never operate your sprayer after consuming alcohol
  • Wear your seat belt in the cab of the sprayer when in use
  • Be sure to unfold your sprayer booms away from power lines
  • Be aware of where power lines cross or border your field
  • Always turn your hazard lights on when driving on roadways
  • Have a slow-moving vehicle (SMV) sign displayed on the back of the sprayer
  • Look before pulling out on to a roadway or backing up in reverse
  • Turn off the sprayer before leaving it unattended

To learn more safety tips avoiding risks on the farm, visit the National Education Center for Agricultural Safety.